LinkBack URL
About LinkBacksIt sure sounds like you're describing a toolbar to me. (I think it would be
easiest to just let it float (don't dock it to the top of the application
window).)
But if you want, maybe something like this:
Option Explicit
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim myShape As Shape
Set myShape = Me.Shapes("Button 1")
With Me.Cells(ActiveWindow.ScrollRow, ActiveWindow.ScrollColumn)
myShape.Top = .Top
myShape.Left = .Left
End With
End Sub
Rightclick on the worksheet that should have this behavior. Select view code
and paste this into that codewindow.
If you did window|freeze panes, so that row 1 is always visible, you may want to
change:
With Me.Cells(ActiveWindow.ScrollRow, ActiveWindow.ScrollColumn)
to
With Me.Cells(1, ActiveWindow.ScrollColumn)
(or whatever row you want the button in).
This routine moves the button when the selection changes. If the user moves the
screen using the scroll bars, then it won't show up until they select a range.
Jack Sons wrote:
>
> Dave,
>
> Maybe my phrase "worksheet button" is wrong, I don't know the correct name.
>
> I mean this.
>
> I can assign a macro (any macro) to either a button on one of the toolbars
> at the upperside of my screen, above the worksheet, or to a button that is
> fixed to a specific worksheet. The latter I meant by "worksheet button". The
> advantage of a worksheet button is that you don't clog the permanent
> toolbars with all kind of buttons that you only need with specific
> worksheets.
>
> When I assign a macro (any macro) to a button on the worksheet, that button
> is fixed (nailed down) to the specific position where I did put it, say for
> example C1. When the worksheet is scrolled to the right the button
> disappears out of sight. If the sheet is scrolled to te region of, say,
> column AP and this button has to be used, you have to scroll back to the
> region where column C - and the button - is visible again. After you get the
> result from clicking the button you have to scroll back to the AP region,
> which is a bit tedious.
>
> What I would like is that the button "floats" on the worksheet so that it
> stays in sight when the sheet is scrolled to the right (or the left).
>
> Hope I made it clear this time. Is what I want possible and if so, how?
>
> Thanks in advance.
>
> Jack.
> "Dave Peterson" <ec35720@netscapeXSPAM.com> schreef in bericht
> news:41E46304.EF1C2FF6@netscapeXSPAM.com...
> > I'm not quite sure I understand the problem with the toolbar.
> >
> > If you create a new toolbar (tools|customize|toolbars tab) and assign your
> macro
> > to that custom toolbar, then you could keep that toolbar shown all the
> time (or
> > hide it and then reshow it on demand).
> >
> > When you click on the button on that toolbar, excel will open that other
> > workbook -- if it's not open already.
> >
> > You wouldn't need to keep that macro workbook open. Excel will take care
> of the
> > housekeeping.
> >
> >
> >
> > Jack Sons wrote:
> > >
> > > Dave,
> > >
> > > About conflicting event ranges: I got it. Thank you very much.
> > >
> > > Connected to my first question another one.
> > > How nice would it be (for me) if a button on a worksheet (such as the
> one
> > > with the find function) would not get out of sight when the sheet is
> > > scrolled to the left or to the right. So a kind of "floating" button
> that
> > > always stays in sight. Can't have it on a fixed toolbar and fixing it to
> a
> > > custom toolbar is not very practical because I would have to enable that
> > > toolbar every time I want to use that button. Fixing it to a cell (for
> > > instance A1) in the left most column and fixing that column (don't know
> the
> > > proper phrase) is also not disirable.
> > >
> > > Is it possible to make a worksheet button that goes along with the
> > > scrolling?
> > >
> > > Jack.
> > >
> > > "Jack Sons" <j.sons@planet.nl> schreef in bericht
> > > news:eHAOlVN9EHA.1292@TK2MSFTNGP10.phx.gbl...
> > > > Dave,
> > > >
> > > > Thanks a lot, I hope to find time during the weekend to try it out.
> > > >
> > > > Jack.
> > > >
> > > >
> > > > "Dave Peterson" <ec35720@netscapeXSPAM.com> schreef in bericht
> > > > news:41DDC46C.BCDCF2D2@netscapeXSPAM.com...
> > > > > Yep. You only get one of each type of event within each sheet
> module.
> > > > >
> > > > > But you could check to see what range you're in and process based on
> > > that.
> > > > >
> > > > > If you have two ranges, you can have
> > > > > 1. No intersection between them (mutually exclusive).
> > > > > 2. An overlap of at least one cell.
> > > > >
> > > > > If the ranges are mutually exclusive, then it's pretty straight
> forward.
> > > > Figure
> > > > > out which one you're in (if either) and do the processing based on
> that.
> > > > >
> > > > > If the ranges overlap, then you have a decision to make. Do you do
> the
> > > > first
> > > > > procedure or the second procedure or both?
> > > > >
> > > > > (Doing one of them, but not the other resolves to the first case,
> too.)
> > > > >
> > > > > You have an overlap of a couple of cells.
> > > > >
> > > > > If you're in column E, do one thing. But what should occur if
> you're in
> > > > > E1--that cell is in both ranges.
> > > > >
> > > > > I decided <vbg> that you wanted to do only one thing and that one
> thing
> > > is
> > > > to
> > > > > show the .find dialog.
> > > > >
> > > > > Option Explicit
> > > > > Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, _
> > > > > Cancel As Boolean)
> > > > >
> > > > > Dim myRng1 As Range
> > > > > Dim myRng2 As Range
> > > > >
> > > > > If Target.Cells.Count > 1 Then Exit Sub
> > > > >
> > > > > With Me
> > > > > 'stay away from row 1???
> > > > > Set myRng1 = Intersect(.Range("e:e,as:as,bt:bt"), _
> > > > > .Rows("2:" & .Rows.Count))
> > > > > Set myRng2 = Me.Range("e1:g1")
> > > > >
> > > > > If Not (Intersect(Target, myRng1) Is Nothing) Then
> > > > > 'it's something
> > > > > 'do your code for stuff that's in e,as,bt
> > > > > 'cancel = true
> > > > > ElseIf Not (Intersect(Target, myRng2) Is Nothing) Then
> > > > > 'do your code for stuff that's in e1,g1
> > > > > Application.EnableEvents = False
> > > > > .Range("E:E,G:G").Select
> > > > > .Range("G1").Activate
> > > > > Application.EnableEvents = True
> > > > > Application.Dialogs(xlDialogFormulaFind).Show
> > > > > 'cancel = true
> > > > > End If
> > > > > End With
> > > > >
> > > > > End Sub
> > > > >
> > > > > ======
> > > > > I left the "cancel = true" commented out. But I would think that
> you
> > > > would want
> > > > > that code uncommented.
> > > > >
> > > > > If your user has edit directly in cell, double clicking will start
> that
> > > > > process. "Cancel = true" stops that from happening.
> > > > >
> > > > > And in the _BeforeRightClick event, "cancel=true" will stop the
> popup
> > > from
> > > > > showing up.
> > > > >
> > > > > (I'm betting that you don't want either to occur, but you'll have to
> > > > uncomment
> > > > > it.)
> > > > >
> > > > > =========
> > > > > And since the routine that occurs with rightclicking also occurs
> with
> > > > > doubleclicking in a certain area, you can put that code in one spot
> and
> > > > then
> > > > > when something changes, you don't have to fix two routines:
> > > > >
> > > > > Option Explicit
> > > > > Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, _
> > > > > Cancel As Boolean)
> > > > >
> > > > > Dim myRng1 As Range
> > > > > Dim myRng2 As Range
> > > > >
> > > > > If Target.Cells.Count > 1 Then Exit Sub
> > > > >
> > > > > With Me
> > > > > 'stay away from row 1???
> > > > > Set myRng1 = Intersect(.Range("e:e,as:as,bt:bt"), _
> > > > > .Rows("2:" & .Rows.Count))
> > > > > Set myRng2 = Me.Range("e1:g1")
> > > > >
> > > > > If Not (Intersect(Target, myRng1) Is Nothing) Then
> > > > > 'it's something
> > > > > 'do your code for stuff that's in e,as,bt
> > > > > MsgBox "myRng1"
> > > > > Cancel = True
> > > > > ElseIf Not (Intersect(Target, myRng2) Is Nothing) Then
> > > > > 'do your code for stuff that's in e1,g1
> > > > > Call Worksheet_BeforeRightClick(Target, True)
> > > > > Cancel = True
> > > > > End If
> > > > > End With
> > > > >
> > > > > End Sub
> > > > > Private Sub Worksheet_BeforeRightClick(ByVal Target As Range, _
> > > > > Cancel As Boolean)
> > > > >
> > > > > With Me
> > > > > 'do your code for stuff that's in e1,g1
> > > > > Application.EnableEvents = False
> > > > > .Range("E:E,G:G").Select
> > > > > .Range("G1").Activate
> > > > > Application.EnableEvents = True
> > > > > Application.Dialogs(xlDialogFormulaFind).Show
> > > > > Cancel = True
> > > > > End With
> > > > >
> > > > > End Sub
> > > > >
> > > > > ps. The application.enableevents stuff is toggled off just in case
> you
> > > > have a
> > > > > _selectionchange event, too.
> > > > >
> > > > > Jack Sons wrote:
> > > > > >
> > > > > > Dave,
> > > > > >
> > > > > > I could use in stead of a find button on my spreadsheet that would
> > > > > > automatically let the find function work in 2 non-consecutive
> columns
> > > > (in my
> > > > > > case E and G), a macro that does the same if E1, F1 or G1 is
> double
> > > > clicked
> > > > > > (or right clicked). Perhaps something like the code below the
> dotted
> > > > line
> > > > > > could work (if you would be so kind to correct it for me). But in
> the
> > > > code
> > > > > > module of the worksheet I already have another worksheet procedure
> > > that
> > > > is
> > > > > > triggered by a double click, it begins with:
> > > > > >
> > > > > > Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range,
> Cancel
> > > As
> > > > > > Boolean)
> > > > > > If Target.Cells.Count > 1 Then Exit Sub
> > > > > > If Intersect(Target, Me.Range("E:E")) Is Nothing And
> Intersect(Target,
> > > > > > Me.Range("AS:AS")) Is Nothing And Intersect(Target,
> Me.Range("BT:BT"))
> > > > Is
> > > > > > Nothing Then Exit Sub
> > > > > >
> > > > > > and also a procedure that reacts to a right click. It begins with:
> > > > > >
> > > > > > Private Sub Worksheet_BeforeRightClick(ByVal Target As Range,
> Cancel
> > > As
> > > > > > Boolean)
> > > > > > Dim myShtCtBar As Object
> > > > > > If Target.Columns.Count = 1 Or Target.Rows.Count = 1 Then
> > > > > > Select Case Selection.Column
> > > > > >
> > > > > > It seems that you can have only one eventprocedure of a kind in a
> > > > worksheet
> > > > > > code module. Is there a way out?
> > > > > >
> > > > >
> > > >
> > >
> > --------------------------------------------------------------------------
> > > > --
> > > > > > -----
> > > > > > Private Sub Worksheet_BeforeDoubleClick( _
> > > > > > ByVal Target As Excel.Range, Cancel As Boolean)
> > > > > >
> > > > > > If Intersect(Target, Range("E1:G1")) Is Nothing Then Exit
> Sub
> > > > > >
> > > > > > Range("E:E,G:G").Select
> > > > > > Range("G1").Activate
> > > > > > Application.Dialogs(xlDialogFormulaFind).Show
> > > > > >
> > > > > > End If
> > > > > >
> > > > > > End Sub
> > > > > >
> > > > > > Jack Sons
> > > > > > The Netherlands
> > > > > >
> > > > > > "Peo Sjoblom" <PeoSjoblom@discussions.microsoft.com> schreef in
> > > bericht
> > > > > > news:9A623137-AE51-48E7-8354-B0AE9F62DB7E@microsoft.com...
> > > > > > > Try
> > > > > > >
> > > > > > > Application.Dialogs(xlDialogFormulaFind).Show
> > > > > > >
> > > > > > >
> > > > > > > Regards,
> > > > > > >
> > > > > > > Peo Sjoblom
> > > > > > >
> > > > > > > "marika1981" wrote:
> > > > > > >
> > > > > > > > I'm trying to write a macro (which I'll assign to an on-screen
> > > > button)
> > > > > > that
> > > > > > > > simply brings up the Find dialogue box. Thus, you press the
> > > button
> > > > and
> > > > > > the
> > > > > > > > Find box appears.
> > > > > > > >
> > > > > > > > When I try to record the macro, it requires I exit the
> dialogue
> > > box
> > > > > > before
> > > > > > > > stopping recording.
> > > > > > > >
> > > > > > > > Any ideas?????
> > > > > > > >
> > > > > > > > Thank you!!!!!
> > > > >
> > > > > --
> > > > >
> > > > > Dave Peterson
> > > >
> > > >
> >
> > --
> >
> > Dave Peterson
--
Dave Peterson
Register To Reply
Bookmarks